все категории
боковой баннер



Processing of stainless steel hairline surface treatment

Время: 2020-11-23 Хиты : 19

Stainless steel hairline refers to the use of surface treatment to process the surface of stainless steel into a linear texture. The surface is matte. If you look closely, you will find traces of texture on the surface of the stainless steel, but you cannot feel it with your hands.

WeChat Image_20201123102514


Under normal circumstances, brushed stainless steel is more wear-resistant than bright stainless steel and looks more advanced.


The three most common effects of волосной stainless steel are straight wire, nylon and snow. These three effects have wide applicability and can be used in various occasions, such as stainless steel walls, elevator stainless steel decorative panels and household appliances panels.


Among them, the linear pattern is a continuous pattern from top to bottom, and a fixed wire drawing machine is usually used to move the stainless steel plate back and forth. The nylon pattern consists of threads of different lengths. Because the nylon wheel is soft, it can be used to grind uneven parts to form a nylon pattern effect. The snow pattern is currently a more popular one. The expression consists of some specifications. It can be processed with sandpaper to achieve the effect.

WeChat Image_20201123102505


Нержавеющая сталь волосной is the most popular surface treatment process in the stainless steel industry today. Under normal circumstances, the stainless steel surface and the чистка machine cooperate to repair and restore the position of the scratches and welds, and finally achieve the overall волосной effect of the stainless steel surface.

Длинное волосной, короткая волосной, coarse sand волосной, fine sand волосной, cross grain волосной, chaotic волосной, primary color волосной, цвет волосной...

The stainless steel волосной board has 4 kinds of surface textures, such as straight волоснойслучайный волосной (and pattern), волосной corrugation and волосной thread. The волосной process is very special in the application of stainless steel plates, and its processing technology has corresponding requirements. Under normal circumstances, repair and restore with волосной processing equipment to obtain a better final effect, that is, to ensure the best overall волосной Эффект.


The surface of the cylindrical stainless steel rod is usually only used on a lathe or grinder, and only requires surface treatment. It can be clamped with a special grinding tool, and polished with sandpaper and cloth strips on a lathe; if there are high requirements for processing accuracy and surface roughness, it will be polished on a grinding machine.


If the surface is brushed, usually only the raw board is processed. The surface of the original board is finished or stretched with snowflakes, and then processed into finished products (for example, molds, аппаратные средства, etc.). Through conventional processing methods, the finished product can retain the surface effect of the original board. The технический масла волосной refers to the surface of the stainless steel plate is relatively shiny after oil polishing, and then сделать a layer волосной. This is a matte and surface treatment. Compared with ordinary волосной, the advantages of oil mill straight line are that the pattern of hairline has clearer texture, higher cleanliness, better gloss, and very good overall effect. It is used for equipment with higher surface requirements such as elevator decoration.

WeChat Image_20201123102522


ДАЛЕЕ: Почему после завершения защиты от отпечатков пальцев на нем будут отпечатки пальцев?